Rear Axle Ladder

The rear axle ladder bar kit shown left was donated for use on the NSRA 2005 give away car. The ladder bars are made from 7/8” x 3/16” CDS with the 5/8” UNF thread tapped directly into the tube and a laser cut fishplate is added to stiffen the assembly. A bonded rubber, steel lined, bush is fitted into a specially machined mild steel housing and a set of our mild steel clevis and lock nuts used at the axle end. The whole assembly is TIG welded and 10-mm mild steel, laser cut axle bracket is added. A set of our extra long chassis brackets, which allow for trimming to achieve the correct chassis attachment angle are shown on the front of the bars. Also shown is our Panhard rod kit and a pair of our rear axle damper brackets.