-
Four Bar Rear Suspension
Our 4 bar kit consists of 4 adjustable bars, up to 36” long, produced in 7/8” O.D. CDS thick wall tubing & TIG welded. Boxed laser cut axle & chassis brackets; high tensile bolts and nylock nuts are also included. Also shown is our Panhard rod kit with front mounting axle bracket. This allows the rod to cross the nose of the differential keeping the rear of the axle clear and using up dead space. We can supply any length. A pair of our rear axle damper brackets are also shown. Again laser cut plates are TIG welded together and high tensile cap head bolts with safety washers and damper…
-
Popular/Anglia Chassis Boxing Kit
Boxing Kit We have reintroduced our chassis boxing kit PBH 2000 . Now using laser cut 3-mm mild steel plates for greater accuracy. Boxing will increase the torsional strength of your chassis & simplify the fitting of cross members. Each of the 12 plates is stamped to show the assemble sequence & full instructions are supplied. Access holes are provided for the standard body mounts, though tapped steel blocks could be welded into the rails before the boxing plates are attached. Ford Style Chassis Plan Reproduced to help you check the dimensions of your chassis, a good bases for planning your modifications. Printed in A3 size for clarity.
-
Rear Axle Ladder
The rear axle ladder bar kit shown left was donated for use on the NSRA 2005 give away car. The ladder bars are made from 7/8” x 3/16” CDS with the 5/8” UNF thread tapped directly into the tube and a laser cut fishplate is added to stiffen the assembly. A bonded rubber, steel lined, bush is fitted into a specially machined mild steel housing and a set of our mild steel clevis and lock nuts used at the axle end. The whole assembly is TIG welded and 10-mm mild steel, laser cut axle bracket is added. A set of our extra long chassis brackets, which allow for trimming to…